2013, THE NETHERLANDS, WATER FOR INJECTION COOLER

  • Home
  • /
  • 2013, THE NETHERLANDS, WATER FOR INJECTION COOLER

03/07/2013

  • 265 kW Pre-Cooler. Cooling 3.000 kg/h WFI from 90°C down to 20°C.
  • Heat exchanger multitubular ITMf type. Double tube sheet to avoid crossed contamination for Pharmaceutical applications.
  • Design according to ASME BPE.
  • RA ≤ 0,5 µm for wetted parts.
  • Designed to be sanitized inside the inner tubes with steam.
  • Fully manufactured in SS 316L.
  • 3 units interconnected by 180° bends.
  • Mounted on frame. Horizontal disposition.
  • Design Pressure 10 bar.
  • Design Temperature 180°C.

 

  • 165 kW Cooler. Cooling 3.000 kg/h WFI from 90°C down to 20°C.
  • Heat exchanger multitubular ITMf type. Double tube sheet to avoid crossed contamination for Pharmaceutical applications.
  • Design according to ASME BPE.
  • RA ≤ 0,5 µm for wetted parts.
  • Designed to be sanitized inside the inner tubes with steam.
  • Fully manufactured in SS 316L.
  • 3 units interconnected by 180° bends.
  • Mounted on frame. Horizontal disposition.
  • Design Pressure 10 bar.
  • Design Temperature 180°C.

 

  • 55 kW Post-Cooler. Cooling 3.000 kg/h WFI from 20°C down to4°C using Ethylen Glycol at -15°C.
  • Heat exchanger multitubular ITMf type. Double tube sheet to avoid crossed contamination for Pharmaceutical applications.
  • Design according to ASME BPE.
  • RA ≤ 0,5 µm for wetted parts.
  • Designed to be sanitized inside the inner tubes with steam.
  • Fully manufactured in SS 316L.
  • 2 units interconnected by 180° bends.
  • Mounted on frame. Horizontal disposition.
  • Design Pressure 10 bar.
  • Design Temperature 180°C.
  • Location: The Netherlands.